Loading
please wait...

Cylinder Accessories

  • $140
    Hollis 15L Twinset Tank Bands
  • $169
    Tank Bands Stainless Steel for 171mm Tanks (pair)
  • $3.3
    TECLINE MOD Sticker
  • $169
    Tank Bands Stainless Steel for 140mm Tanks (pair)
  • $159
    Tank Bands Stainless Steel for 215mm Tanks (pair)
  • $39
    TECLINE Cam Band Delrin Buckle (single)
  • $35
    Cam Band Heavy Duty Plastic Buckle (single)
  • $45
    Cam Band Stainless Steel Buckle (single)
  • $65
    TECLINE Stage Rigging Kit Small (5-7L) Cylinders
  • $69
    TECLINE Stage Rigging Kit Large (10-12L) Cylinders
  • $47.95
    Stage Rigging Kit Small (5-7L) Cylinders

GEAR GUIDE

ABOUT DIVE CYLINDERS

What is the best scuba cylinder?

Aluminium vs steel 

In general anything on the back should be steel and anything that is carried off-board, should be aluminium.

Luxfer aluminium cylinders are preferred in 80cuft as they become neutral earlier than most other 80cuft aluminium cylinders by 20-30 bar and have the characteristic of being lighter in the bottom. This allows them to sit up nicely under a divers arm, thereby creating less drag as they tuck into the divers side stream. Being neutral also makes them easier to manipulate on the dive and on the surface when handing them up to the boat.

Single cylinder on the back – steel is the best choice here because as the cylinder empties, it still remains negative in buoyancy.

Twin cylinders on the back – steel is the best choice due to its negative buoyancy characteristics.

Deco cylinders/Bailout – used for decompression gasses and can be nitrox or trimix. Aluminium is best as they start negative, but become neutrally buoyant at around 140 bar. 

Stage cylinders – used for additional back gas and staged (removed and left) on the way into a cave. Aluminium is best as they start negative, but become neutrally buoyant at around 140 bar.

Pony bottles/Bottom mix off boards – used to extend the time spent on the bottom or as redundancy. Aluminium is best as they start negative, but become neutrally buoyant at around 140 bar.

Common Cylinders
Luxfer AL40 – used for 100% oxygen, deco, bailout.

Luxfer AL80 – used for deco mixes, bailout, stage, and pony/bottom mix.

Faber Cylinder Specifications - 232 bar
Water 
Capacity       
Volume 
Cu Ft
Un-valved 
Weight
Length  Diameter Buoyancy
Empty
Buoyancy
Full
7 litre 55 cf 7.6 kg 605 mm 140 mm -1.0 kg -3.0 kg
10.5 litre 85 cf 11.3 kg 560 mm 178 mm -1.0 kg -4.0 kg
12.2 litre
standard
100 cf
standard
12.9 kg 625 mm 178 mm -0.75 kg -4.25 kg
15 litre 125 cf 16.5 kg 610 mm 204 mm -1.0 kg -5.25 kg

What is the best scuba cylinder for single tank diving?
The 12.2 litre Faber is the best choice for back gas, singles, or twinsets for reasons of length, capacity, and versatility.
10.5 litre – length is 560mm, which makes most divers very head heavy, forcing them to drop out of trim to correct the high centre of balance. This in turn makes the diver inefficient in moving through the water column, resulting in higher gas usage and higher levels of exertion during the dive.  

12.2 litre
– length is 625mm, with an ideal balance point close to the centre of the cylinder.

12.2 litre compact
- length is 515mm with a lot of weight towards the neck of the cylinder, making divers very head heavy. These are the least desirable of all steel cylinders.

15 litre
– length is 610mm with a lot of weight towards the neck of the cylinder, making divers very head heavy again. If you feel you need this much gas, a better choice would be twin 7 litre cylinders due to much better weight distribution of the cylinders on your back.

What tanks are best for backmount twins?
 

The 12.2 litre Faber standard is the best choice for a twinset too, as all of the length and centre of balance issues with the other sizes presented above are now doubled in a twinset.

2x 10.5 litre = 4872 litres of gas at 232 bar = weight on back 22.6kg = 215 litres of gas per kilo carried.

2x 12.2 litre = 5660 litres of gas at 232 bar = weight on back 25.8kg = 219 litres of gas per kilo carried.

2x 15 litre = 6960 litres of gas at 232 bar = weight on back 33kg = 210 litres of gas per kilo carried.

The 12.2 litre option has the best balance point and is the lightest while having the most efficient gas to weight ratio. When you add to this, the increased drag from the larger diameter 15 litre cylinder at 204mm, against the 12.2 litre’s 178mm and you can see why we choose the 12.2 (100cuft) cylinders.

Request Course
expand

Request Course

Collapse
Our instructors invest time and effort to help you become a great diver at every level. We offer premium REC and TEC courses, flexible schedules, attention to detail, small class sizes, taught by instructors with great depth of knowledge and experience.



DIVING OPPORTUNITIES

Book your next dive with more select operators!

DIVE BOOKINGS