1x TECLINE 17 Special Edition 38lb Donut Wing
1x TECLINE Back Plate 3mm | 0.118in Stainless Steel
1x TECLINE DIR Harness
TECLINE 17 Special Edition 38lb Donut Wing
Donut wing design greatly reduces the movement required to redistribute gas around the wing, irregularly shaped to enhance trim. Very versatile with 22kg | 49lb lift capacity, suitable for twin cylinders 10.5L | 85cf to 12.2L | 100cf.
The irregular circle design provides better horizontal trim, easier hose routing, and a higher vertical position when on the surface.
Double-layer heavy duty Nylon construction for durability.
TECLINE Back Plate 3mm | 0.118in Stainless Steel
Use as the basis for building your own technical diving or recreational scuba diving system. Comfortable and well shaped. Versatile range of harness slots and holes, with beveled edges to reduce wear on equipment.
Features sliding cinch on left side to allow easy tightening and loosening of single piece harness.
TECLINE DIR Harness
All webbing and hardware needed for a DIR harness. The webbing is made from a high quality nylon weave, suitably strong and sufficiently flexible for comfort.
The DIR Harness includes:
1x 50mm | 2in webbing for harness
1x Crotch strap with 2x flat D-rings and 2x smooth tri-glides
2x Velcro & webbing loops (holds bladder to BP when disconnected from tanks)
1x Stainless steel weight belt buckle
2x Stainless steel bent D-rings (for shoulders)
1x Stainless steel flat D-ring (e.g. for left hip)
6x Stainless steel smooth tri-glides (for D-rings, bungee and adjusting shoulder strap length)
5x Rubber webbing holders
1x Bungee loop (for inflator)
TECLINE 17 Special Edition 38lb Donut Wing
Donut bladder
Double layer construction:
- Outer shell - 1000D Nylon
- Inner bladder - 840 Nylon
Access to inner bladder is via YKK zip.
K-type piston power inflator
Standard corrugated hose 40cm | 15.7in (includes optional replacement 33cm | 13in)
LP inflator hose.
Release Valve on lower left underneath
TECLINE Back Plate 3mm | 0.118in Stainless Steel
Marine grade 304 stainless steel, polished
Thickness: 3mm | 0.118in
Weight: 2.4kg | 5.3lb
Cinch on left side